Data Center Series

FanOut with 2mm tails

12-24 Cores 4.5±0.3mm Fanout with 2.0mm Tails

Available OM3, OM4 and OS1/OS2, G.657A1 types 12 and 24 cores standard 2mm ruggedised tails (900μm tails available) LSZH, cable jacket Available with all standard connectivity Factory terminated and tested Reduced weight and carriage costs
MTP Female to MTP Female(1)

MTP® Female to MTP® Female 12F OM4 3.0mm Patch Cord

Low insertion loss, high return loss Economical solution for mass-termination of fiber Good in repeatability and exchangeability ROHS Compliance. 12 core fiber available Small volume, easy management
MTP®MPO Turnk Cable

MTP®/MPO Trunk Cable

For interconnect between equipments, patching or backbone installation. Choices of either both ends with Male or Female connector. Up to 144F connection is available. Customized length to fit for each installation needs. High precision factory pre-terminated and factory tested assemblies made according to TIA/ EIA standards.

HDPP01

1U 96F Economical HD Fiber Optic Patch Panel with 4 Plastic Cassettes

HDPP03

1U 96F HD Fiber Patch Panel with 4 Plastic Cassettes

HDPP04

19″ 1U 120F HD patch panel with 5pcs MPO cassettes
1U 144F HD Fiber Patch Panel-1

HDPP05

1U 144F HD Fiber Patch Panel with 12 Plastic Cassettes
Supertap-MPO-APC-Male-to-Supertap-MPO-APC-Male-4.0x7-01

Supertap MPO/APC Male to Supertap MPO/APC Male 4.0*7.0 mm 12F

Smaller profile and reduced bend radius Robust design keeps the connector intact Monoblock pull-eye/connector cap designed for 100 lb maximum pull tension Hybrid (one end with a SuperTap 12-fiber MPO connector and the other end with SuperTap 12-fiber MPO connector on both ends) Designed for aerial, direct-buried or duct installation Outdoor round armored cable for […]
MTP to LC fanout cable OM4

12F MPO/ MTP® to 6x Duplex LC Fanout Cable 2.0mm

Quick installation time Singlemode & multimode performance Ensure optimum interconnect performance Interferometer tested Quality controlled factory Easy to use MTP® brand connector
MTP Fanout Harness Cables

MTP® to FC 8F Multimode Breakout Harness Cables 100G

Quick installation time Singlemode & multimode performance Reduced Insertion Loss by up to 50% Ensure optimum interconnect performance High Temperature Stability Good Exchangeability Factory Terminated and Tested