Fiber Optic
Cable
Connectivity
PLC & WDM
Component
Cable Management
Accessories
1U Patch Panel with Sliding Rail and Modular Adapter
- Easy slide in and out
- Unit is 19” mountable
- No exposed screws
- Built-in strength member tie positions
- High-quality finish
1U height 19inch rack mounted fiber optic patch panel with Sliding Rail and Modular Adapter can install 4 of modules, can use a full array of adapters. It offers a flexible solution to the end user, enabling them to incorporate a multifunctional chassis that allows easy access during installation or rework with no disturbance of the existing cable or fibers. Also, the panel offers multiple cable entry solutions, MPO/MTP® trunk cables connected to 4 individual spliced into standard splice cassettes to allow standard splicing or pre-terminated solutions, making this panel one of the most flexible on the market.
Features&Benefits:
- Modular design for easy organisation – modular cassettes
- 24 port SC duplex single structure with a sliding rails
- Recessed adaptors for improved fibre management
- Front cable tray for easy fiber management
- 4 cable entries into the patch panel
Application
Data-center
LAN
ATM
Telecommunication-network
High density fiber cabling system
WAN
Parameter of Rack Mount Fiber Optic Patch Panel, LGX
| Parameter | Value | |
| Operation Temperature | -40℃~+60℃ | |
| Storage Temperature | -40℃~+60℃ | |
| Relative Humidity | ≤85%(+30℃) | |
| Air Pressure | 70kpa~106kpa | |
| Size(mm) | 483x260x44 | |
| LGX Module | Material | SP CC (cold rolled steel sheet) |
| Color | Black | |
| (front)Adapter type | LC-QT ×6Pcs, SC DX ×6Pcs, LC DX ×12Pcs, SC SX ×12Pcs | |
| (front)Adapter color | Aqua: OM3/OM4; Beige: OM1/OM2
Blue: SM-UPC; Green: SM-APC |
|
| (rear)Adapter type | MPO/MTP (Full flange/Opposed) | |
| (rear)Adapter color | Black | |
| Connector A | SM: LC-UPC,0.9mm or LC-APC,0.9mm
MM:LC-UPC,0.9mm |
|
| Connector B | SM: MPO/MTP (male)-APC MM: MPO/MTP(male)-PC | |
| Patch cord polarity | Type A | |
Datasheet
