CPRI LC to LC Waterproof FTTA Fiber Optic Patch Cable

  • 1fibers,2fibers,singlemode or multimode
  • Compact design with 2×1.25mm ferrules
  • 100% interferometer measurement
  • Extension connector for cable chaining
  • Easy and safe installation

Fiber-to-the-antenna (FTTA) is a wireless site architecture where optical fiber is run all the way up the tower to replace much of what was traditionally completed with heavier coax cabling. FTTA cables are produced with duplex Base Station Far Transmission fiber cable, FTTA patch cable is kind of indoor/outdoor fiber jumper with 7.0mm or 4.8mm diameter, water blocking aramid yarns and
UV resistant LSZH jacket.

From 1/2/4 up to 12 and 24 fiber, we can also be hybrid with 2 or more DC cord in the same cable , the multicore can be assembly with full breakout cable or loose tube to provide a small and light size of the cable.



  • Cable measures smaller than the corrugated cables
  •  Weight cable reduction in comparison to corrugated cables solutions
  • Low attenuation
  • Lower labor in installation
  • Large energy savings


CPRI Duplex LC FTTA Cable application
CPRI Duplex LC FTTA Cable application
CPRI Duplex LC FTTA Cable application

Parameter of CPRI Duplex LC FTTA Cable

Parameter Valve
Fiber Type SM or MM
Outdoor Cable Armored or without armored
Connector End face PC/UPC/APC
Protected Branch length Customize