Fiber Optic
Cable
Connectivity
PLC & WDM
Component
Cable Management
Accessories
Fiber Optics Connector FC Simplex Single Mode
- Low insertion loss
- High corrosion resistance
- High interface performance
- High return loss
- Easy to handle
- Environmentally stable
- Individual removable dust covers
An optical fiber connector terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers.
The FC connector is a fiber-optic connector with a threaded body, which was designed for use in high-vibration environments. It is commonly used with both single-mode optical fiber and polarization-maintaining optical fiber. FC connectors are used in datacom, telecommunications, measurement equipment, and single-mode lasers. They are becoming less common, displaced by SC and LC connectors.
Features and Benefits:
- Ease of installation
- Low cost
- Reliability
- Low environmental sensitivity
- Ease of use
Application
Telecom
Ethernet-network
Parameter of Fiber Optics Connector FC
| Parameter | Value | |||
| SM Standard | SM Premium | SM Premium plus | MM | |
| Insertion Loss | ≤0.3dB | ≤0.3dB | ||
| Return Loss | ≥50dB(UPC);≥60dB(APC) | ≥30dB | ||
| Ceramic ferrule spec （125.5μm concentricity deviations） | <1μm | <0.5μm | <0.3μm | 127μm concentricity deviations <4μm |
| Insert-pull test | 1000 times<0.3dB | 1000 times<0.3dB | ||
| Operation temperature | -40℃~+85℃ | -40℃~+85℃ | ||
| Suitable fiber | UPC/APC(9/125μm) | UPC (50/125μm,62.5/125μm) | ||
| Boot type | 0.9mm /2.0 mm /3.0 mm /Short Boot/ Long Boot | 0.9mm /2.0 mm /3.0 mm /Short Boot/ Long Boot | ||
Datasheet
