Fiber Optic
Cable
Connectivity
PLC & WDM
Component
Cable Management
Accessories
ABL-FDB014 — Fiber Optic Distribution Box
- Total enclosed structure.
- Material: PC+ABS, wet-proof, water-proof, dust-proof, anti-aging, protection level up to IP54.
- Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution…etc all in one.
- Cable, pigtails, and patch cords are running through their own paths without disturbing each other, micro type PLC splitter installation, easy maintenance.
- Distribution panel can be flipped up, feeder cable can be placed by expression port, easy for maintenance and installation.
- Box can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor use.
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, and distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
Features and Benefits:
- Total enclosed structure.
- Material: PC+ABS, wet-proof, water-proof, dust-proof, anti-aging, protection level up to IP54.
- Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution…etc all in one.
- Cable, pigtails, and patch cords are running through their own paths without disturbing each other, micro type PLC splitter installation, easy maintenance.
- Distribution panel can be flipped up, feeder cable can be placed by expression port, easy for maintenance and installation.
- Box can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor use.
Application
FTTH
LAN
Parameter of Fiber Optic Distribution Box
| Environmental requirement | Working temperature: -40℃～+85℃ |
| Relative humidity: ≤85% (+30℃) | |
| Atmospheric pressure: 70KPa~106Kpa | |
| Main technical datasheet | Insertion loss: ≤0.15dB |
| UPC return loss: ≥50dB | |
| APC return loss: ≥60dB | |
| Thunder-proof technical datasheet | The insulation resistance between the grounding device and the metal parts of the box is no less than 2×104 MΩ/500V (DC); IR≥2x104 MΩ/500V. The voltage resistance between the grounding device, and the box and its metal parts is no less than 3000V (DC)/min, no puncture, no flashover; U≥3000V |
CONFIGURATION TABLE
| Model | Size (mm) | Max Capacity | Installation Size
(mm) |
Into the largest
cable diameter (mm) |
Maximum size
of branch hole (mm) |
| ABL-FDB014-12C | 200*110*45MM | 12 | 82*135MM | ᴓ8~15 | ᴓ1.9 |
| ABL-FDB014-24C | 265*155*55MM | 24 | 112*150MM |
Datasheet
